EZ1 Advanced XL User Manual 11/2017
68
Press
SHIFT–down arrow
to move the cursor right, from
HH
(hours) to
MM
(minutes) to
SS
(seconds).
Press
SHIFT–up arrow
to move the cursor left, from
SS
to
MM
to
HH
.
Press the
up arrow
or
down arrow
to increase or decrease the value of the selected field.
After setting the time, store the setting by pressing
ENT
. Alternatively, press
ESC
to leave the time
unchanged.
5.10.3
Setting the serial port
This setting configures the serial port for use with a printer or a PC as the output device for the
report file.
Press
3
in the system setup menu to change the setting of the serial port.
SYSTEM SETUP
1: Date
2: Time
3: SerialPort 4: PM
ESC: Back
The following screen appears.
SETUP: SERIAL PORT
Current: CS
Set: NS
Up, Dn, ENT, ESC
CS
(current setting) indicates the current setting of the serial port as
PC
,
Printer
or
Not Used
.
Press the
up arrow
or the
down arrow
to change the
NS
(new setting) field to
PC
,
Printer
or
Not
Used
.
Store the new setting by pressing
ENT
. Alternatively, press
ESC
to leave the current setting
unchanged.
5.10.4
Setting the annual maintenance reminder
Press
4
in the system setup menu to change the setting of the maintenance reminder.
SYSTEM SETUP
1: Date
2: Time
3: SerialPort 4: PM
ESC: Back
