Rotor-Gene Q MDx CE User Manual 02/2022
25
3.2
External features of the Rotor-Gene Q MDx
1
Air vents on the lid
3
Rotor chamber
2
Lid handle
4
Instrument status lights
3.2.1
Air vents on the lid
The Rotor-Gene Q has vents on the rear of the instruments lid. these vents allow the instrument to
vent heat from the chamber during operation. Blockage or insufficient clearance around the vents
can impact the performance of the instrument.
3.2.2
Lid handle
The lid handle is used to slide the lid of the instrument back. this handle is not intended to support
the weight of the instrument and should not be used to lift the instrument.
3.2.3
Rotor chamber
The rotor chamber is where rotors are loaded and undergo the programmed heating and cycling
steps.
3.2.4
Instrument status lights
There are two status lights on the Rotor-Gene Q. The standby light indicates that the instrument is
not in use. The running light flashes when the Rotor-Gene Q is in use.
1
2
3
4
