Qeedji SMH300, User Manual

Page: 57 / 80

57
3.1.16 Maintenance > Logs
From the
Maintenance
pane, select the Logs menu to activate logs. The log levels are:
DEBUG
: activation of level logs: ERROR + WARN + DEBUG,
WARN
: activation of level logs: ERROR + WARN,
ERROR
: activation of level logs: ERROR,
OFF
: disabling logs.
Logs are compartmentalized according to software functions such as:
app
: App debug,
widget
: HTML widget debugging,
network
: debug of the network related layer,
☛ These logs may be activated on support request in exceptional debug cases.
☛ These logs can only be interpreted only by software developers who are familiar with the software bricks that have been developed.
Activating the logs with a level other than
OFF
should only be done after a request from
Qeedj i
support.
◬
Enabling traces
All trace levels of undeclared categories
with a
DEBUG
or
WARN
level can significantly disrupt the operation of the
device.
◬
After a debug session with support, in nominal operation, all levels should be reset to
OFF
.