Qeedji SMH300, User Manual

Page: 22 / 80

22
3.1.4 Configuration > SLATEs pairing
In the
Configuration
pane, select the SLATEs pairing menu to pair the SLATEs to your SMH300 device.
The SMH300 device is designed to work with at least one and up to ten SLATEs.
◬
In case you are using a SMH300 device already installed, it is recommended to double check its heartbeat configuration before starting any
configuration. For further information, refer to the chapter § Common preferences . In the factory configuration, the SMH300 device configures
the SLATEs so that they are waking up every 15 minutes from 8:00 AM to 7:00 PM.
Prepare SLATE pairing configuration
◬
Before starting any SLATE pairing, ensure that your device is on time. For further information, refer to the chapter § Configuration > Date
and time .
To pair properly one or several SLATEs to your SMH300 device, you need to prepare for each SLATE PSN (Product Serial Number):
a specific
Index
: between 1 and 10,
a specific
Hostname
: max: 8 alphanumeric digits,
an optional pairing
PIN code
: 0000 .. to 9999.
In case you had to use several SMH300 devices, prepare the same information for all of them.
For example, when the SLATEs are installed in different locations and in different buildings:
Building A :
SMH 30 0 device' s hostname Meeting room name SLATE PSN slate # slate hostname slate pairing PIN Code
floor-1
Sales
00900-00050 1
Sales
none
floor-1
R&D
00900-00051 2
R&D
1234
floor-1
Director
00900-00052 3
Director
none
floor-1
Berlioz
00900-00053 5
Berlioz
none
Building B :
SMH 30 0 device' s hostname Meeting room name SLATE PSN slate # slate hostname slate pairing PIN Code
floor-2
Prod
00903-00054 1
Prod
none
floor-2
Havana
00903-00055 3
Havana
none
floor-2
Valley
00903-00056 5
Valley
none
floor-2
Paris
00903-00057 7
Paris
none
In case only few slate devices are used, do prefer use the lower
Index
(1, 2, 3, … ), whose the content is updated first, before using the higher
Index
( … ,
9 , 10).