![background image](http://html1.mh-extra.com/html/qeedji/slate-series/slate-series_user-manual_3136891039.webp)
1.6.7
Software release
When paired to a
SMH300
hub, the SLATE106 is able to install a new software release provided by the hub.
A minimum available free space of 220 KB is required on the USB storage to warranty the SLATE106 software upgrade.
If not paired to a
SMH300
hub, it is possible to trig a software release upgrade:
Plug the SLATE106 device to a computer with an USB cable (*micro USB type B to USB) and wait for the USB mass storage is mounted properly,
Copy the software file
pictureframe-slate106-setup-1.11.10.rpk
.
If you have not, download the lastest
Pictureframe
version on the Web site www.qeedji.tech
Eject properly the USB mass storage,
Wait for about 3 minutes the time for the SLATE106 device to reboot and install the new software release (the left red LED is blinking during the installation),
Wait for a while so that the USB mass storage is mounted back again. The software upgrading has completed.
39