Qeedji AMP300, User Manual

Page: 23 / 87

23
AQS firmware upgrade by WebDAV
Prerequisite:
a WebDAV client (for example, like CarotDAV , BitKinex ) is installed on your computer or
the AMP300 device is mounted as a disk on the MS-Windows explorer. For further information, refer to the chapter § device network disk
mounting in MS-Windows explorer .
☛ The
Web UI admin
credentials put at factory to access to the
.software
WebDAV directory is:
admin
/
admin
.
☛ The port value put at factory to access to the WebDAV directory is
80
. The port value can be modified by using a configuration script. For
further information, refer to the chapter § Device configuration by script .
◬
In case you have lost your login credentials to access to the WebDAV server, the only way to restore some known HTTP/WebDAV server login
credentials is to install an appropriate configuration script through the USB-C connector ( USB 1 or USB 2 ). For further information, refer to the
chapter § Device configuration by script .
☛
https://
scheme to access to the AMP300 is not yet supported.
Copy the
aosp-amp300-setup-9.YY.ZZ.fqs
archive in the
.software/
directory located at the root of the AMP300 WebDAV server.
This message should be displayed.
☛ The copy duration is depending on the firmware size.
This message is then displayed showing that the firmware is being unzipped.