QED LANDTEC i-Q Series, Operation Manual, Page: 34 / 51

Operation Manual
GEM and GEM PRO
OMiQGEM-L Issue.02
Page 34 of 51
MODULES
CASE BACK REMOVAL
To prevent inhalation of harmful gases:
•
All module bays must have a module or bypass module present.
The i-Q instrument contains modules that can be changed by the customer without the need to return the
instrument for servicing or replacement. To access these modules, follow this procedure:
1) Place the instrument face down on a suitable surface
2) Using the supplied tool, select the Phillips No. 1 screwdriver and unscrew the four screws holding the
battery
3) Remove the battery
4) Using the supplied tool, select the Phillips No. 1 screwdriver and unscrew the four screws holding the I/O
plate at the top of the instrument
5) Gently lift the faceplate away from the case, while keeping it parallel to the top of the case
Figure 10 – Inlet Port Plate Removal
iQV15