QED LANDTEC i-Q Series Operation Manual Download Page 33 | Manualshive

Page: 33 / 51

QED LANDTEC i-Q Series Operation Manual Download Page 33

Operation Manual

GEM and GEM PRO

OMiQGEM-L Issue.02

Page 33 of 51

Note: In the event of malfunction or damage, please contact QED or an authorized representative.

Note: For further information please contact Technical Support at QED on:

WATER FILTERS

Each inlet port has a PTFE filter to stop liquid from entering the instrument:

1)

Using the supplied tool, select the Phillips No. 1 screwdriver and unscrew the 4 faceplate screws

2)

Gently lift the faceplate away from the case, whilst keeping it parallel to the top of the case

Note: Filters firmly located in the i-Q body can be removed using the supplied filter removal tool.

3)

Replace the filters by placing them inside the faceplate.

4)

To reassemble, follow the above steps in reverse order, paying attention to the good fit of mating
components and taking care not to overtighten any screws.

QED Environmental Systems Ltd.

+44(0)333 800 0088

[email protected]

QED Environmental Systems, Inc.

+1 (800) 624-2026

[email protected]

iQV14

«
...
31
32
33
34
35
...
»

Summary of Contents for LANDTEC i-Q Series




















































Reviews:

No comments