QED LANDTEC i-Q Series, Operation Manual, Page: 26 / 51

Operation Manual
GEM and GEM PRO
OMiQGEM-L Issue.02
Page 26 of 51
AFFINITY PAIRING
To pair the i- Q and the “Affinity” handheld wireless device, there are two available methods:
READING PROCESS
1) Power on the Affinity by holding the power key for 2 seconds. The status LED will blink green.
2) During the gas sampling stage ‘Initial Values’, the i -Q will automatically search for Affinity devices in range.
3) Select the Affinity to pair with it from the list of discovered devices
Note: If ‘Auto Connect’ is selected, the i-Q device will automatically connect to that Affinity device in the future.
MAIN MENU
1) Power on the Affinity by holding the power key for 2 seconds. The status LED will blink green.
2) From the Main Reading Screen, press the menu key
3) Select “Settings”
→
“Comms”
→
“Bluetooth”
4) Ensure Bluetooth is turned on
5) Press “Scan” and the i -Q will search for Affinity devices in range.
6) Select the Affinity to pair with from the list of discovered devices and press “Connect”
CREATING IDs IN THE FIELD
To create IDs on the i-Q you must have an existing Site and Group (previously uploaded from GAMSoft
software).
1) Select Next ID, then select the menu key
2) Scroll down to select the option ‘Add ID’
3) Populate all mandatory fields and select Save.
Note: If adding an ID in the field, when downloading readings in GAMSoft, you will be asked whether you would
like to include this new ID in your site.
SAMPLING FROM A QED ORIFICE PLATE
To prevent fire and explosion:
•
Do not charge or open in a hazardous or potentially explosive area.
•
Eliminate all ignition sources; such as pilot lights or cigarettes.
To prevent inhalation of harmful gases:
iQV11