Step 1 - Attaching Straps to the TV
Pull the furniture out from the wall. Release all the Cam
Locks and extend the straps to the maximum length.
Locate the upper VESA mounting holes on the back of the
TV and select the correct bolt size to fit the holes. Attach
both TV Mounting Plates.
There are two options for attaching the Wall Brackets. (2A)
The Zero-Screw option into hollow drywall using the
SecureHooks™ or (2B) with screws into a stud. For
installation into any other wall material, use only the
appropriate hardware for that material. Consult a
professional baby proofer, a handyman or hardware
store for advice.
ILine up the straps
as straight as
possible from the
TV while securing
the Wall Bracket,
while making sure
it’s positioned within
the “safe zone.” Now
mark the location 12” down from the top edge of the
furniture. Next peel the protective liner from the adhesive*
and position the first Wall Bracket in the desired location
with the strap pointing upwards.
nsert the point of one of the SecureHooks™ in the upper
right hole in the Wall Bracket. While turning the Secure-
Hook™ from side to side, apply pressure until it penetrates
the drywall. Continue to feed the SecureHook™ all the way
in and then turn until it locks into the Catch in the Wall
Bracket. Put a second SecureHook™ through the lower left
hole in the Wall Bracket and push through the drywall. This
SecureHook™ will turn in the opposite direction and then
lock into the Catch in the Wall Bracket.
Repeat for second Wall Bracket and then attach the Covers
over the Wall Brackets while holding straps up.
Step 2 - Positioning and attaching
the Wall Brackets
2A -Insert SecureHooks™ into hollow drywall
Use a stud finder to locate the studs in the wall behind the
TV and mark the inside edges of the studs at the height
of the furniture. The “safe zone” for the SecureHooks™ to
rotate properly is 3.5” from each stud as seen in the
drawing.
Lock
SecureHook™
under catch
2A
