ENGLISH
31
Initial Configuration
Prepare the TFTP server and save the latest image file (*.stk) in its root directory (assuming that
3.
the IP address is 192.168.2.100).
Example of TFTP Server Screen
Figure 4-4:
Upgrade the Firmware Image File
4.4.2
The switch supports two images, active and backup. Input the following command to download the
1.
image to backup image:
copy tftp://<server ip addr>/<file name> image backup
Backup Image Screen Sample
Figure 4-5:
Input the following command to set the backup image as the “next boot” image:
2.
boot-system opcode backup
Set Boot Image Success Screen Sample
Figure 4-6:
Reboot the switch.
3.
After the system boots up, input “
4.
show version
” to display and verify the updated version.
