ENGLISH
19
Hardware Installation
Items Required for Installation
3.2.1.2
The following items are required for installing, configuring, and connecting the switch:
A workstation
•
Ethernet cable
•
Console cable
•
SFP+ modules
•
Phillips screwdriver
•
Install the Switch
3.2.2
Install in a Rack
3.2.2.1
You can install the switch in most standard 19-inch (48.3-cm) racks.
Without Rail Installation
Align the built-in mounting ear to the rack holes and secure them with screws.
Install Switch on Rack (Without Rail)
Figure 3-1:
With Rail Installation
Align the rail holes with the holes on the switch.
1.
Holes Alignment
Figure 3-2:
Secure them with two screws.
2.
Secure Position
Figure 3-3:
