manualshive.com logo in svg

QCT QuantaGrid Series, Service Manual

Share
Download
QCT QuantaGrid Series Service Manual Download Page 62

BIOS

A

DVANCED

 S

CREEN

 3-5

Advanced Screen

The Advanced screen provides an access point to configure several options. On this 
screen, the user selects the option that is to be configured. Configurations are performed 
on the selected screen, not directly on the Advanced screen.

Table 3: Main Screen Description

S

ETUP

 I

TEM

O

PTIONS

H

ELP

 T

EXT

C

OMMENTS

BIOS Vendor

Information only. Displays the 
BIOS Vendor.

Core Version

Information only. Displays the 
AMI BIOS Core version.

Compliancy

Information only. Displays the 
BIOS compliancy.

Project Version

Information only. Displays the 
Project version.

Build Date and 
Time

Information only. Displays the 
BIOS build date.

Total Memory

Information only. Displays the 
Total System Memory Size.

System Date

[Day of week 
MM/DD/YYYY]

Set the Date. Use Tab to switch 
between Date elements.

Valid range of year : 1998~2099.

System Time

[HH:MM:SS]

Set the Time. Use Tab to switch 
between Time elements.

Access Level

Information only. Displays the 
Access Level.

Summary of Contents for QuantaGrid Series








































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands