Qcells Q.MOUNT, Installation Instructions Manual

Page: 23 / 34

Q.MOUNT INSTALLATION INSTRUCTIONS Tiled Roofs
23
•
Screw the cross connector into the upper profile channel of the base girder profile and insert
the Allen screw with the threaded plate into the upper channel as well.
•
Align the cross connector and tighten the Allen screw with a torque of 15 Nm.
NOTE: If the base girder profiles are mounted perpendicular to the ridge, the girder profile
screw of the cross connector must always be aligned upwards (towards the ridge).
FASTENING THE GIRDER PROFILES
TO THE ROOF HOOK AND CROSS CONNECTION
•
Place the girder profile with the correct side on the quick-mounting adapter of the roof hook.
•
And fasten the girder profile with the Allen screw (perpendicular to the eaves) with a torque of 15 Nm.
•
Make sure that the girder profiles are mounted tension-free.
•
For this purpose, use the adjustability of the roof hook (ribbing and slotted hole on the
quick-assembly adapter).
•
Make sure that a force-fit and form-fit connection is achieved by the interlocking of the corrugations.
•
Place the girder profile on the cross connector with the correct side facing upwards and
align. Tighten the Allen screw with a torque of 15 Nm.
•
When loosening and tightening the screw several times, make sure that the threaded plate is
correctly aligned (across the profile channel).