4
15 luglio 2019
•
Do not use any damaged power cable, plug, or
loose outlet. It may cause damages to the product
or injury to people.
•
Do not touch electrical components to avoid
damages due to electrostatic charges.
•
Make sure the end-effector is properly and
securely bolted in place and cabled.
•
Do not use if damaged or defective. Do not
disassemble.
•
Do not insert any objects between moving parts
of the fingers.
•
Keep head and face outside the reach of the end-
effector.
•
Do not wear loose clothing or jewelry when
working with the end-effector.
•
Disrespect of these precautions can affect safety
of the device.
2.3
EC Directives on product safety
•
The following EC directives on product safety must be observed.
•
If the product is being used outside the UE, international, national
and regional directives must be also observed.
Machinery Directive (2006/42/EC)
Because of their small size, no serious threats to life or physical condition
can normally be expected from electric miniature drivers. Therefore, the
Machinery Directive does not apply to our products. The products described
here are not “incomplete machines”
, so installation instructions are not
normally issued by qbrobotics.
Low Voltage Directive (2014/35/EU)
The Low Voltage Directive applies for all electrical equipment with a nominal
voltage of 75 to 1500 V DC and 50 to 1000 V AC. The products described in
this device manual do not fall within the scope of this directive, since they
are intended for lower voltages.
