25.
Tilt up one side of the chiller and remove the
runner. Discard runner.
2
1
26.
Tilt up the other side of the chiller and remove the
other runner. Discard runner.
1
Runner
2
Runner
27.
When moving a tester with leveling glides, do not
hit floor drain, cracks, etc, as the glides may be
damaged. If specified at the time of order, the
chiller may be equipped with casters.
Leveling
Glides
To complete tester installation see
through
.
28.
Go to the sections listed above.
Section 5. Uncrating
21
NOTE:
Optional casters may be install on chiller models.
The part number is X-10845-K.
Contact
for more information.
