QSD2304L DVR User’s Manual
‘NC’ means normal close. If ‘NC’ is chosen, the DVR will send alarm when the alarm is in high level.
5.
TRIGGER RECORD
One channel can connect to one sensor. But one sensor can match one or more channels.
STEP1
Press "
Up
", "
Down
", "
Left
" and "
Right
" buttons to move the cursor to "
TRIGGER RECORD
" option.
STEP2
Select the check box of the channel which matches sensors.
STEP3
Press "
Enter
" key to confirm the operation.
For example, if you select the sensor named SENSOR1 and the record triggers named CAM1 and CAM2, it will record on
channel 1 and channel 2 when SENSOR1 is triggered.
6.
ALARM OUT
There are two options to choose: ALARMOUT1 and BUZZER.
•
When ALARMOUT1 is selected and the sensor is triggered, the DVR will give a normal alarm.
•
When BUZZER is selected and the sensor is triggered, the DVR will give a buzzer alarm.
•
When the alarm output is unselected, DVR will not send an alarm.
7.
SCHEDULE
this is the schedule of the sensor detection. The default schedule is everyday.
8.
COPY TO
You can copy the setting of this channel to any other selected channels.
OTHER ALARM
Other Alarm submenu is shown as Fig3.13. Other alarm includes video loss, disk full and so on.
Fig3.13 Other Alarm Configuration
21