MOTION ENABLE: motion alarm switch, it can be set to on or off. If users set it to off the DVR’s
motion alarm will be ignored. If it is set to on then the DVR’s motion detection will be enabled.
MOTION LEVEL: motion detection sensitivity level, if the figure in the picture is small please set to
high or very high, the default is normal.
BUZZER TIME: buzzer sound time when there is a sensor or motion alarm.
SENSOR RECTIME: after a motion or sensor alarm is triggered the amount of time the DVR will
continue to record after the motion stops. The default is 1 minute.
Notice: Users should press the schedule button after setting up the parameters to activate
the settings.
5.6.1 MOTION DETECTION SETTINGS
1) When viewing nearby objects (2-10 meters)
When in daytime please set motion detection sensitivity to Normal level; at night please set to
low.
2) When viewing far objects in 50-100 meter range
Objects 50-100 meters away will be quite small on the screen. When in daytime please set
motion detection sensitivity to high level.
At night set to normal level.
27
Summary of Contents for QSD2216C16-250
Page 1: ......
