USER’S MANUAL
57
Edit Transponder
After pressing the green function key, you can edit the selected transponder’s detailed
information such as frequency, symbol rate and polarisation. When finished, press OK key to
exit the editing state.
7.1.4 Motor Setting
Through the Motor Setting page you can control the polar axis motor to adjust the direction of
antenna so as to make the antenna accurately point to the satellite. There are these setting
items in this page (see Figure 7-8):
Satellite:
Select a satellite.
Transponder:
Select a transponder.
Motor setting:
Set the polar axis motor.
If you have already selected a satellite and a transponder, when moving the polar axis you will
find the signal strength and quality indicators at the bottom of the page.
