Freeze time
Sets the seconds per visualisation of the time per lap upon reaching the finish line OFF – 60 seconds (30 seconds default)
Crono mode
Setting of the visualization of the time during lap:
ROLLING: classic visualization with time rolling
PRED. DELTA: predicted delta, predicted difference of the current lap with the best lap
PRED.TOTAL: predicted total, predicted time visualization
RPM max bar
Setting the maximum engine revs value for the graphic bar: 8000 - 18000 rpm (default 12000 seconds)
5.5 – Dash settings
To change the dash setting, enter the MENU using button 2, select SETUP and then select DASH.
In this menu we will find several items that can be set regarding the dashboard’s preferences:
Speed unit
Setting the speed unit: Km/h (metric, default), mph (imperial)
Temperature
Setting the temperature: °C (Degrees Celsius, default), °F (Fahrenheit)
Pulse RPM
Set the RPM reading parameters:
1 - one pulse per drive shaft rotation (ex. standard 2 stroke engines)
2 - two pulses per drive shaft rotation (ex. 2 stroke engines with waste spark)
4 - four pulses per drive shaft rotation (ex. 2 stroke engines with waste spark)
½ – one pulse per two drive shaft rotations (ex.: standard 4 stroke engines)
Input BOX 1
Box 1 in PZRacing products is the box dedicated to the functions of Engine RPM, Engine Temp and input of the first Analog channel.
Box 1 Internal
RPM: inductive using the cable supplied with the instrument
TEMP: temperature acquired by connecting the NTC sensor directly behind the dashboard (SENS connector)
EGT: exhaust gas temperature, 150cm Y cable (code SSY150) required to connect to the SENS connector behind the dashboard.
ONLY NTC SENSOR
NTC EGT
PZRacing Via de Gasperi 5 – 61032 Fano (PU) Italy - Tel: +39 0721 820434 – Email: [email protected]
