A-Tronic AP600
User Manual - v1.1 – 08/06/21
Puoi trovare l’ultima versione del manuale, manuali applicativi, video tutorial e manuali in altre lingue, cliccando sul
link di seguito o scannerizzando il QR code a lato
You can find the latest version of the manual, application notes, video tutorial and manuals in other languages,
clicking on the link below or scanning the QR code on the side
AP600 is not compatible with APX electronics (racing electronics by Aprilia)
Installation
Fit the A-Tronic connector to the special input of your motorcycle, you can find it under the rear seat, check the images below to locate the connector.
GPS receiver installation
N.B: do not place cameras or other sources of electromagnetic interference near the receiver to avoid the GPS signal being
disturbed
Place the receiver module with the writing facing upwards and in a horizontal position with a clear and unobstructed view of the sky,
it is
recommended to place it on the tail of the motorbike.
The tank and the lateral air intakes of the motorcycle are highly not recommended as the GPS receiver would be completely
covered by the chest and head of the rider and also during a turn the GPS receiver would be completely obscured by the motorcycle
itself.
Fix the entire length of the sensor cable, make sure that the cable is not under tension when using the device.
Usage
N.B: to be able to reveal the lap times you must activate the lap timer on the dash, refers to motorcycle's instruction manual.
Start session
The receiver works fully automatically, turns on when the vehicle is turned on, hooks up to the satellites and loads the correct track automatically, then
after the vehicle has started it will start showing the lap time on the motorcycle dashboard and memorizing the data if the function has been activated.
Below is the legend of the product status via the receiver LED:
- Solid:
Wi-Fi on, GPS receiver not ready. The signal which is being received is not strong enough to locate the position. If a long period of time has
passed or if you have travelled several kilometres from the place you last switched on the device, you have to wait up to 4-5 minutes to receive a signal;
otherwise one minute is necessary to locate the position. If the led does not change status, position the receiver in a less restricted area because it
couldn't receive a good signal.
-
Slow blink (1S off, 1S on):
Wi-Fi on, GPS receiver ready. You can start your session.
- Fast blink (400mS off, 100mS on):
Wi-Fi off, motorbike moving. After the bike has started and has reached 30Km/h for 5 seconds, the Wi-Fi is
turned off and the receiver will be ready to show the lap time on the dashboard.
N.B: if your circuit is not in memory send an email to
with the name and location of the circuit, we will send you a
firmware update with your track
Wi-Fi
The GPS receiver is equipped with an integrated Wi-Fi
module that will be used for data download and settings
related to storage. Wi-Fi turns on when the product is
turned on and turns off when the motorcycle exceeds
30Km/h, to reactivate the Wi-Fi it will be necessary to turn
off and on the GPS receiver.
The default data for the Wi-Fi network are the following:
PZRacing Via de Gasperi 5 – 61032 Fano (PU) Italy - Tel: +39 0721 820434 – Email: [email protected]
