7.2
Connecting to uPyxis® Desktop App
Connect the LSP-X01 Series sensor to a Windows computer using a Bluetooth/USB adapter (P/N: MA-NEB)
according to the following steps:
1. Plug the Bluetooth/USB adapter into a USB port in the computer.
2. Launch
uPyxis®
Desktop App.
3. On
uPyxis®
Desktop App, click Device
→
Connect via USB-Bluetooth as seen in Figure
??
4. If the connection is successful, the LSP-X01 Seriesand its Serial Number (SN) will be displayed in the
left pane of the
uPyxis®
window.
*
NOTE
*
After the sensor and WiFi/Bluetooth is powered up, it may take up to 10 seconds
for the adapter to establish the wireless signal for communication.
Figure 13.
LSP-X01 Series User Manual
| +1 (866) 203-8397
11
Summary of Contents for LSP-X01 Series
Page 1: ......
