5.4
Diagnosis Screen
From the
Diagnosis
screen, you can check the diagnosis condition as well as
Export & Upload
. This feature
may be used for technical support when communicating with
To preform a Cleanliness and Selflife Check, first select the
Diagnosis Condition
which defines the fluid
type that the ST-773 sensor in currently measuring, then press
Cleanliness and Selflife Check
. If the sensor
is clean, a
Clean
message will be shown. If the sensor is severely fouled, a
Please replace the DO membrane
cap
message will be shown. In this case, follow the procedure in the
Methods to Cleaning the ST-773Sensor
section of this manual.
Figure 9.
5.5
Device Info Screen
From the
Device Info
screen. You can name the Device or Product as well as set the Modbus address.
ST-773 User Manual
| +1 (866) 203-8397
15
Summary of Contents for 53709
Page 1: ......
