6.4
Calibration Screen
To calibrate the device, click on
Calibration
. On the
Calibration
screen there are three calibration tabs,
Zero
Calibration
,
Slope Calibration
, and
4-20mA Span
. The screen also displays the reading of the device. The
reading refresh rate is every 4 seconds. Follow the screen instructions for each calibration step.
Figure 15.
6.5
Diagnosis Screen
After the device has been calibrated and installation has been completed, to check diagnosis, click on
Diag-
nosis
. When in the
Diagnosis
screen you can view the Diagnosis Condition of the device. This feature may
be used for technical support when communicating with
Figure 16.
ST-730 Series User Manual
| +1 (866) 203-8397
13
Summary of Contents for 50626
Page 1: ......