Pico-pH-SUB
| Manual
© PyroScience GmbH
27
-21
UART Parse
An error occurred while parsing the command string.
The last command should be repeated.
-22
UART Rx
The command string was not received correctly (e.g.
device was not ready, last request was not terminated
correctly). Repeat the last command.
-23
UART Header
The command header could not be interpreted
correctly (must contain only characters from A-Z).
Repeat the last command.
-24
UART Overflow
The command string could not be processed fast
enough to prevent an overflow of the internal
receiving buffer
-25
UART Baudrate
The requested baudrate is not supported. No baudrate
change took place.
-26
UART Request
The command header does not match any of the
supported commands.
-27
UART Start Rx
The device was waiting for incoming data; however,
the next event was not triggered by receiving a
command.
-28
UART Range
One or more parameters of the command are out of
range.
-30
I2C Transfer
There was an error transferring data on the I2C bus.
-40
Temp Ext
The communication with the sample temperature
sensor was not successful.
-41
Periphery No
Power
The power supply of the device periphery (sensors, SD
card) is not switched on.
5.5
Available Implementations of Communication Protocol
We offer libraries for controlling
Pico-pH
using
LabView
programming language. The
libraries and corresponding documentation are free for download from our website.
