Pico-pH-SUB
| Manual
© PyroScience GmbH
14
OPTION 2: OPERATING THE MODULE WITH
PYRO DEVELOPER TOOL
For
advanced evaluation purposes
the module can be operated with the software
Pyro
Developer Tool
. It offers simple settings and calibration procedures, as well as basic
logging features. Furthermore, additional advanced settings offer full control on all
features of the module. This software requires the encoded USB interface cable
PICO-
USB
for connecting the module to a Windows PC.
4.1
Installing the software Pyro Developer Tool
System requirements:
PC with Windows 7/8/10 and min. 1000 MB free disk space.
Do not connect the USB-interface cable to your PC before the
Pyro Developer Tool
has
been installed. The software will install automatically the appropriate USB-drivers.
Installation steps:
•
Download the
Pyro Developer Tool
from the downloads tab on
•
unzip and start the installer and follow the instructions
•
connect the interface plug of the USB interface cable the connector X1 of the
Pico-pH
