MUX2
| User Manual
© PyroScience GmbH
13
3.3
Computer-Controlled Operation
1. Establish the power supply connections
and cabling as described in the last section.
2. Install
Profix
on your PC.
3. Connect the USB plug of the
MUX2
to
the PC. If the
Profix
installation was
successful, the PC should automatically
install the correct USB-driver for the
MUX2
.
4. Start
Profix
.
The versatile control software
Profix
is available by download from the
PyroScience
homepage (
). For further instructions, please refer to the
installation guidelines and manuals of
Profix
.
IMPORTANT:
Before connecting the USB-plug for the first time to the USB-port
of your computer, first install the control software
Profix
!
The installer package of
Profix
will install all needed USB-drivers.
