background image

SLRBT20

Operation Manual for 2.4 G Wireless RC Boat 

1. The product adopts 390 magnetic motor driving system as well as advanced 2.4 G

    frequency pairing automatically technology for longer controlling distance.
2. Be equipped with Li Battery. The highest speed is about 25km/h.
3. Boat Specification: 424*114*119 mm
4. Special anti- capsize function: turn over when capsize for normal sailing.
5. Motor cooling system: extend use life of the boat.
6. Build-in left and right navigation rudder: enhance sailing stability.
7. Low battery alarm function: the transmitter issues sound of “dididi...” low battery

    alarm. Please recall the boat in on minute.

Security Warning

For the safety and avoid hitting people which around propeller, the boat can’s work

properly till put into the water. Never touch the rotating propeller. 
1. The product is suitable for more than 14 years old people. Please use it under

    adult’s supervision and guidance. 
2. Never mixed use old and new battery or different types of batteries. Never charge

    a non-rechargeable battery.
3. Never charge the battery at once after using till cooling down.
4. Make sure that there is no one swimming around to avoid injury before sailing.

    Keep away form water plant and debris to avoid the propeller tied up in the water

    and cause damage.
5. The effective control distance is about 150m. Never exceed the range or the boat

    may be out of control. 
6. The transmitter will issue sound of “dididi” when low battery in the sailing. At this

    time the boat will slow down and the battery only can maintain one minute. Please

    recall the boat in one minute to avoid out of control.
7. When the boat sailing far away from the transmitter, the transmitter will issue alarm

    sound of di.di.di

.

di.di

.

 -di.di.di.di.di

.

 Long distance between the boat and the

    transmitter will arouse poor signal, which will effect the timeliness and accuracy of

    the transmitter’s low voltage alarm function. At this time, please control the boat

    sailing close to the transmitter (the transmitter power indicator light turns solid) to

    ensure the low voltage alarm function works well.

8. Please power off the transmitter and the boat when the boat not in use. 
9. Please attach great importance on safety first when sailing. If the boat out of control,

    retrieve the boat by safe and reliable method. Never retrieve the boat without any

    safe measure. 

Maintenance and Repair

1. Take out the battery when the boat stops working.
2. The boat surface should avoid long time exposure to prevent paint-shedding. 

    Each time after use, clean the boat surface by dry and soft cloth to absorb water. 

    Keep the boat clean and dry to prevent oxidation of internal components and wire, 

    which may result in dysfunction.
3. If the RC boat is not used for a long time, remove the battery to avoid leakage

    damaging form battery to the transmitter.

2

8. Poor Signal alarm function: the transmitter will issue alarm sound of di.di.di.di.di - 

    di.di.di.di.di once the 2.4G signal becomes poor.

by

Summary of Contents for SereneLife UDI R/C SLRBT20

Page 1: ...control 6 The transmitter will issue sound of dididi when low battery in the sailing At this time the boat will slow down and the battery only can maintain one minute Please recall the boat in one minute to avoid out of control 7 When the boat sailing far away from the transmitter the transmitter will issue alarm sound of di di di di di di di di di di Long distance between the boat and the transmi...

Page 2: ...the USB with the computer or the adapter The USB light is red when charging and turns to green when fully charged The charging time is about 220 minutes Please cut off the charging wire after fully charged 3 4 Picture for RC Boat Main Structure Display Support Holder Forward Trim Backward Trim Power Indicator Light Left Rudder Trim Right Rudder Trim Power Switch Rudder Knob Throttle Trigger Capsiz...

Page 3: ...k the throttle trigger of the transmitter and the boat goes forward Forward 2 Push forward the throttle trigger of the transmitter and the boat goes backward Backward Code Pairing Between Transmitter and RC Boat Power on the transmitter and the power indicator light of the transmitter flashes and issues sound of di Put the boat into water and the transmitter issues constantly sound of dididi The p...

Page 4: ...ill return to normal RC Boat Capsize First After 6 If the boat drifts to right press the left rudder trim of the transmitter the and the boat will back to correct rudder slowly and sails straightly Left Rudder Trim Left Trim 7 If the boat drifts to left press the right rudder trim of the transmitter the and the boat will back to correct rudder slowly and sails straightly Right Trim Right Rudder Tr...

Reviews: