Security File Cabinets
Multi-Drawer Filing Cabinet with Combination Lock
Models: SLFCAB10, SLFCAB20
HOW TO SET A CUSTOM PASS CODE:
1. Adjust the pin to your current pass code (By default, the lock pin is set to “0000”).
2. Completely remove the top drawer from the cabinet and on the inside of the cabinet switch the
lever located on the lock from the B to A position.
3. While lever is in A position - set the desired new code. Make sure the 4 dials you set are exactly
parallel and lined up - you don’t want to set to the wrong number by mistake! (Sample below).
4. Once your new pass code is entered, change the lever back from A to the B position.
5. Make sure to write down & remember your code! There is no way to recover it once it is set!
by
0 0 0 0
1 3 1 4
A
B
A
B
A
B
A
B
