-6-
-7-
b
15 degree
viewing angle
eyelevel
a
Fig 2a
Step 2:
mount to wall
First, determine the height of stand
The best height of stand is parallel to eyelevel of a person who sitting on a couch.
Normally, the horizontal distance of eyelevel is about 4’ from ground level.
The following two conditions are for determining the perfect height of stand:
1)
the distance between wall and couch(Fig 2a).
2)
the distance of eyelevel from ground level plus the distance measured from
eyelevel of a person sitting on couch with viewing angle of 15 (Fig 2a).
For example:
1)
the distance of ‘a’ is 5’-7’, the distance of ‘b’ is about 1’
2)
the distance of ‘a’ is 8’-13’, the distance of ‘b’ is about 3’
3)
the distance of ‘a’ is 14’-17’, the distance of ‘b’ is about 4’
The perfect height of stand centre will be anywhere within b, where you feel
comfortable for viewing.
°
Attach
Step 2: Attach mount to wall
After determining the height of stand, follow the installation instructions in below
to install wall mount to different kinds of wall
Using a awl or nail to make where the nails are located, as shown as Fig.2b. Distance
between two nails for fixing wall mount must not less than 16 . Pre-drill these holes
with a 5mm drill bit to at least 80mm in deep hole. Use wall mount as a template to
mark the location of other three holes and drill the same holes.
Fix the wall mount to the wall with 4 long bolts(J) and
washers(L).
-wooden, brick, concrete and stone.
Please make sure these
holes are level and eudipleural.
Wooden wall:
”
Wooden wall:
Fig. 2b
16”
80
5
Fig. 2c
J
L
Wood stud
