MULTI
-
CURRENCY
DETECTOR
User
Manual
PRMDC40
3
Function Button
The Function Button allows you to customize your machine
• Press and hold the Function Button once and
you will see (
CLr
) in the LED display. This will
clear all calcuation and bring the display back
to (
0
).
• If you continue holding the Function Button,
within 5 seconds you will have the choice
the direction the banknote will exit.
Exiting though the rear (
UUUU
) will be displayed
in the LED.
Exiting thought the front ( ) will be displayed
in the LED.
• The unit will beep 2 times and the
direction of bill exit will blink one in the
LED that go dark. The bill direction is now
set as the new default
• To change direction repeat the above steps
to show the desired direction.
Counting Function
The bill detector has a built-in counting function.
• The unit will automatically detect the bill
denomination and add it to the previous
amount. The new total will then appear in the
LED.
• The machine will count, add and display totals
up to (
9999
)
Clearing The Totals
Clearing the totals from the machine is very simple.
• Press and hold the Function Button once and
you will see (
CLr
) in the LED display. This will
clear all calcuation and bring the display back
to (
0
).
Updating For New Currency
The machine has the ability to be updated with the introduction of new currency.
Press and Hold
Function Button to Clear
Press and Hold
Function Button to Clear
Bill Rear Exit
Bill Front Exit
Displays maxium of 9999
UUUU
