Pyle PDWR69BTB User Manual Download Page 1

www.PyleUSA.com

www.PyleUSA.com

Wall Mountable, 100 Watts MAX

with 2-Way Full Range Stereo

Sound Reproduction, Pair

PDWR69BTB - PDWR69BTW

6.5'' Pro Active Wireless BT

Streaming Speakers

Questions? Issues?

We are here to help!

Phone: 

(1) 718-535-1800

Email: 

[email protected]

Note:

Anytime you note distortion, reduce the volume to a lower setting. Never 

allow your amplifier to be driven into "

clipping

". Otherwise the speakers 

may be damaged. Damage caused by operating the speakers at distorted 

volume levels is not covered by the warranty.

WIRELESS BT PAIRING

Ensure the speaker is connected to the power supply and turned on. 

Any BT device (such as phones, tablets, laptops etc.) is available for pairing.

Note:

• There will be a prompt sound when BT is connected/disconnected.

• BT Input has the priority when BT input and RCA input are connected   

   simultaneously. To listen to RCA input audio, disconnect from BT before  

   using a RCA input  device.

• One device can only connects or control  one BT speaker at a time. 

   If device A connects and controls BT, device B cannot search or control the  

   BT speaker. Device A MUST no longer be connected, then device 8 can  

   connect and control.

• If pairing fails the first time, restart all the equipment and then follow the  

   above instructions.

• If you are unable to reconnect a previously connected device, remove the  

   "

PyleUSA

" from the list of paired devices, and then follow the above   

   instructions  again.

• The BT connection will be lost if the distance between the speaker and the

   BT device exceeds 1Om (32.8 ft.).

PyleUSA

PyleUSA

1. Open the setting

    menu and select BT.

2. Turn on BT and

    search devices.

3. Click "

PyleUSA

"to

     pair with your device.

CARE AND MAINTENANCE

• Turn off the power to the speaker when unused for long periods of time.
• Ensure all equipment is turned off prior to cleaning. Surfaces and cabinet  
   need only occasional dusting/cleaning. Never use chemicals or solvents as  

   they may damage the surface. Always clean using a dry cloth.

• Never touch the speaker drivers.

Technical Specs:

• Power Supply: 100W (MAX Power)

• RMS Power: 50W (Passive Speaker)

• Speaker Size: Sound System: 6.5'' Subwoofers: 0.5'' Tweeter

• Subwoofer Type: 6.5'' Paper Cone

• Tweeter Type: 0.5'' Mylar Dome

• Frequency Response: 70-20 kHz (+/-3dB)

• Speaker Impedance: 8 Ohm

• Audio Sensitivity: 86dB

• Construction Material: Polypropylene

• Power Cable Length: 3.94 ft.

• Power Output: 100-240V

• Single Speaker Dimensions (L x W x H): 8.5'' x 7.6'' x 11.7'' -inches

Reviews: