PDWM92
Professional VHF Headset Microphone
Pro Audio Wireless Beltpack Mic Transmitter System with Adapter Receiver
www.PyleUSA.com
INSTRUCTIONS
RECEIVER
Belt-Pack Transmitter
HOW TO USE?
1. Open the battery cover of the receiver, put 1AA battery inside the battery compartment. Make sure the “
+ -
”
polar is correct.
2. Turn
ON/OFF
switch to ON, the LED indicator is lit. Then insert the 1/4”(6.3mm) Input Jack into audio input
socket, the LED indicator is become brighter after receiving RF signals.
3. Turn ON the transmitter switch, the LED indicator is lit. Now the system is ready to use
Notice:
1. If there is any noise, distortion, dead points when using the this system, it may be caused from low battery,
please replace with new battery.
2. After using it, please turn the switch to “OFF”.
3. If you will not use this system for a long time, please take out the batteries.
Battery Cover
1/4”(6.3mm) input Jack
OFF
ON
LED
ANT
Headset Microphone
Headset Mic input
