- 8 -
PARAM ETER SETTING INSTRUCTION
NOTE :
1.
BK/START_T :
The period time before starting music
2.
BK/STOP_T :
The period time before stopping music
3.
PS/BPM_SYNC:
Add the PHASER effect to the music in a cycle
based upon the selected beat
4.
PS/GAIN:
Determine the volume of PHASER effect signal. The
higher ratio with stronger effect.
5.
PS/TIME:
Determine the length of PHASER effect. SYNC-OFF,
0.25 sec is the shortest, and 8 sec is longest; SYNC_ON, 1/4
beat is the shortest and 64 beats is the longest.
6.
FG/BPM_SYNC:
Add the FLANGER effect to the music in a
cycle based upon the selected beat
7.
FG/GAIN:
Determine the volume of FLANGER effect signal. The
higher ratio with stronger effect.
8.
FG/TIME :
Determine the length of FLANGER effect. SYNC-OFF,
0.25 sec is the shortest, and 8 sec is longest; SYNC_ON, 1/4
beat is the shortest and 64/1 beats is the longest.
9.
EC/BPM_SYNC:
Add the ECHO effect to the music in a cycle
based upon the selected beat
10.
EC/GAIN:
Determine the volume of ECHO effect signal. The
higher ratio with stronger effect.
11.
EC/DELAY_LG:
The delay time of ECHO effect. SYNC OFF,
0.01 sec is the shortest, and 4 sec is longest; SYNC_ON, 1 beat
is the shortest and 4/1 beats is the longest.
12.
FL/BPM-SYNC:
Add the FILTER effect to the music in a cycle
based upon the selected beat
13.
FL/SCAN_TIME (FL/BPM-SYNC:ON):
Determine the scanning
time of FILTER effect. 1/4 beat is the shortest and 64/1 beats is
the longest
14.
FL/FREQUENCY(FL/BPM-SYNC:OFF) :
Select the band of
frequency. The number increased, The frequency is close to the
treble. The number decrease, The frequency is close to bass.
15.
FL/GAIN:
Determine the volume of FILTER effect signal. The
higher ratio with stronger effect.
16.
PAN/BPM_SYNC:
Add the PAN effect to the music in a cycle
based upon the selected beat
17.
PAN/MIX :
Determine the volume of signal taken for mixing to the
other side.
18.
PAN/PERIOD:
Determine the period of PAN effect. SYNC-OFF,
0.06 sec is the shortest, and 4 sec is longest; SYNC_ON, 1/64
beat is the shortest and 4/1 beats is the longest.
19.
CP/BPM_SYNC:
Add the CHOP effect to the music in a cycle
based upon the selected beat
20.
CP/WIDTH :
Determine the ratio of auditable music, the higher
ratio with more audible signal.
21.
CP/PERIOD :
Determine the period of CHOP effect. SYNC-OFF,
0.06 sec is the shortest, and 4 sec is longest; SYNC_ON, 1/64
beat is the shortest and 4/1 beats is the longest.
22.
SPL/MIX_VOL:
The ratio of SAMPLE single mixing into the
music.
23.
SPL/PITCH:
To select the sample pitch range from –100% to
+100%, 0% means sample playback speed is
unchanged.
24.
SPL/LOOP_SW:
To play the sample music repeatedly
25.
SPL/REVERSE:
To play the sample music backward to mix with
music.
26.
SPL/INSERT :
To cut off the music and insert the sample music.
27.
KEY_SEMITONE :
SEMITONE_ON, to change the key by half
step, from +12 to –24 key; SEMITONE_OFF, change the key by
percentage from –100% to +100%.
Summary of Contents for PDCD6000MP
Page 1: ......