HOW TO ASSEMBLE THE STEAM MOP
WARNING
Please make sure that the unit is unplugged from an electrical outlet.
1) Attach the mop head to the main body
as follows: insert the swivel joint into
designated hole in the main body, and
then use the screw to fix well. Make sure
that the mop head is securely locked in
place before usage.(Fig.1)
2) Insert the extension handle into the
designated opening in the main body until
it gets locked in place by the extension
handle lock button. (Fig.2)
3) Insert the power supply cord into the
cord holder located at the top of the
extension handle as illustrated in Fig. 3
and then insert to power supply cord into
the upper cord wrap as illustrated in Fig. 4
4) Place the microfiber cloth on the bottom
of the mop head and make sure all the
loops on the cloth are aligned with the
gripping hooks on the bottom of the mop
head (Refer to Fig. 5), then press the cloth
against the mop head so the loops on the
cloth catch the gripping strips on the mop
head and hold the pieces together.
NOTICE:
Never use the carpet glider on surfaces
that are prone to scratching.
Caution:
Never assemble or remove the
accessories while the unit is in operation.
