Note:
1.After assembly each accessories, add water in the tank up to the
MAX level by using the measuring cup
2.Turn the knob of the water tank in "Lock diagram" position. Then
you can open the power switch(Min to Max), choose the temperature
from 'MIN" to 'MAX".
AFTER USE
1) Unplug power cord from outlet
2) Allow mop pad to cool down and carefully remove cleaning cloth
from mop head, as cleaning cloth could still be hot.
3) Any water remaining in the water tank should be emptied prior to
appliance storage.
Always empty the water tank at the end of each use
4) Let any water (remained as a product of condensation) drain from
the steam opening prior to storing the appliance.
5) Wrap power cord around upper and lower cord wrap
6) Wipe all surfaces of the unit with a soft cloth. Store in a protected
dry area.
7) Please store the unit in a cool and dry place when not in use. Do not
leave it exposed to sunlight or rain.
8) Upright storage of the unit with a wet mop pad may result in the
formation of white marks on your floor. To remove the white marks,
clean area with vinegar. Make sure to remove the map pad before
storage.
CLEANING AND MAINTENANCE
BE SURE THAT THE UNIT IS DISCONNECTED FROM THE POWER
OUTLET WHEN PERFORMING CLEANING.
Drain the remaining water in the tank and clean it after every use.
Please use detergent to clean the accessories (Jet Nozzle and Round
Brush) when they are dirty, then wash them with clean water and dry
them in air.
How to decalcify the water tank interior:
To clean calcium deposits that build up inside the water tank, add one
or two tablespoons of white vinegar to a full water tank, close the water
tank cap and shake the contents. DO NOT TURN THE STEAMER ON.
Let it sit for a few hours. Then, empty the water tank and refill with
clean water and empty until it rinses clear.
