Table Cleaner
8. Attached the main steamer to the square brush ,until it locks in
place(as illustrated in Fig.8a&8b), then place the square cloth on the
bottom of square head and make sure all the loops on the cloth are
aligned with the gripping hooks and the bottom of square head (Refer to
Fig. 8c).
Note : Press the two buttons on the square brush to take of the main steamer.
Straight Nozzle
9. To attach the straight nozzle: Insert the straight nozzle into designed hole in the extension
Hose, as illustrated in Fig.9a&9b. Until it gets locked in place.
Round Brush
10. Attach the round brush by screwing it onto the straight nozzle that
connected to the extension hose, as illustrated in Fig. 1 0a &1 0b.
Bend Nozzle
11. Attach the bended nozzle by screwing it onto the straight nozzle that connected to the
extension hose. as illustrated in Fig.11a&11b.
