HOW TO USETHE STEAM MOP
PLEASE READ BEFORE USE
The unit is designed to thoroughly clean floor surfaces, such as
marble, ceramic, carpet, stone, linoleum, sealed hardwood floor and
parquet. Not all floors types are suitable for steam cleaning.
On surfaces that have been treated with wax, the wax may be removed
by the heat and steam action. Do not use on unsealed flooring or let
unit stand on any wood or heat sensitive floor for an extended period of
time. This could cause the wood grain to rise.
When using on vinyl, linoleum or any other heat sensitive floors, use
extra caution. Too much heat can melt down glue in the flooring. When
using the appliance on laminated floor, the laminated floor should
have been laid professionally and not have any gaps or cracks in
which humidity could enter.
Test the unit on a small isolated area of your flooring prior to over- a
use on any floor surface.
Always check the use and care instructions of your flooring
manufacturer before using the unit.
If any doubt, please consult a specialist. Only use the carpet glider on
carpeting & rugs. Use of the carpet glider on other floor surfaces will
cause streaking and can possibly scratch the surface.
Fill the Water tank with water.
Make sure that the unit is unplugged
Turn the Water Tank cap counter-clockwise to the open "off ' position
and remove the cap as illustrated in Fig. 1a, 1b&lc, 1d.
