the control button for a moment. The diode will signal the change of
adjustment direction. The pressing of the adjustment button again will cause
the dimming of the lamp (brightness decrease).
While the lamp operates, the diode stays switched off (excluding
situations mentioned above).
5.2 DMX signal
The PX803-W lamp can be controlled via one DMX channel – lamp
brightness.
Setting the lamp parameters:
Value of the lamp parameter
Value of the DMX signal
Brightness adjustment
100%
255
:
:
50%
128
:
:
0%
0
6
Cooperating with the PX277 configurator
The PxArt+ Mono Wall settings can be changed by connecting to the
PX277 (PxArt+ Settings Controller) configurator. It allows in connection with
PX803-W to define the following parameters: DMX addresses for brightness
(in the range of 1 – 512) and device behavior in the absence of DMX signal
(programmable scene).
When the lamp is connected to the configurator, the PX803-W will restart.
9
