Please note that after restoring to default settings, all the operating
parameters of the device will revert to the following ones:
•
DMX address: 1
•
driver operating mode: RGBW (4b – 4 byte)
•
master mode: off
•
number of sent DMX channels: 128
•
white balance: off
•
no signal operating mode: scene (all channels controlled by 50%)
•
frequency: 366Hz
•
smooth function: off
5.14.2
Error message
The device is equipped with a built-in memory work control function.
If there are problems with the memory operation on the PX782 display, the
Err
message appears – memory error.
In this situation, select the “
enter
” key. The device will reload the default
configuration and upload it to the memory. If after this operation, the
Err
message remains on the screen, the memory is permanently damaged and
the unit must be sent to the service point.
26
