10.2 Core mode, FTP support
After switching to the core mode (stop in the bootloader), it is possible
to connect the controller using the FTP protocol. In this mode, you should
always connect to the default static address on the controller from the ADMIN
account level, by providing the default password (device serial number) – even
if it has been changed.
Direct connection (cable) – assumptions:
•
a computer with a stable IP in the same sub-network as the controller
•
the controller in the core mode, i.e the PWR diode flashes
static address of the controller
user name: ADMIN
ADMIN password
(serial number)
NOTE! Recommended FTP client is the free WinSCP program.
36
