6.6 Scene editing
In the
Scene editing
menu, it is possible to change parameter settings for
a given scene. As for the
Program editing
sub-menu, after selecting the scene
display option by a lamp or group of lamps, in the simultaneous absence of an
input DMX signal to the PX252 driver, the programmed scene is played
continuously. The meaning of particular messages is described in the item 6.5
Program editing.
6.7 Temperature limits
This option allows for setting a temperature value which, if reached, limits
power consumption or turns off the device powered by the driver. This can be
applied to LEDs which are located in areas with high temperatures.
There are two PX252 inputs to which one temperature sensor can be
connected. To set a limit, select an appropriate button on the screen, set the
light power limitation temperature
Sensor on
and the total light power
limitation temperature (lamps off)
Sensor off
for an appropriate sensor.
19
