With this solution, it is possible to make a precise synchronization even in
very large installations without using an external controller.
Con
– turning
on
or turning
oFF
the Master feature
Chn
– the number of DMX channels sent
In case when Master feature is active dot in the lower right corner starts
to blink with 0,25Hz frequency. When the PX282 is receiving DMX-512 signal it
starts to blink with 2-times bigger frequency (0,5Hz).
11 White balance
Sometimes, there can be problems with getting white colour on the RGB
series LEDs. This may be a result of using diodes with different technical
parameters. For this reason, the PX282 module is equipped with a white
balance function. This option allows for choosing a correct colour
temperature for full activation of all 3 outputs (white colour).
17
ENTER
ENTER
3 x NEXT
NEXT
ENTER
NEXT
ENTER
NEXT
ENTER
