PXM Gate 4 DMX, User Manual

Page: 8 / 27

ENTER
PX724 G4 DMX RDM
2.139.178.116
ENTER
Network config.
ENTER
IP address
2.139.178.116
IP address
[2].139.178.116
NEXT
ENTER
Subnet mask
255.0.0.0
Subnet mask
[255].0.0.0
NEXT
ENTER
Gateway address
2.0.0.1
Gateway address
[2].0.0.1
NEXT
ENTER
DHCP
Off
DHCP
[Off]
NEXT
DHCP
[On]
NEXT
ENTER
UDP port
6454 0x1936
UDP port
[6454 0x1936]
≡
≡
≡
≡
≡
->
2 x NEXT
4.4 DMX IN / OUT port settings
The gate can work in two configurations of signal conversion:
Art-Net on DMX512 and DMX512 on Art-Net. To do this, the DMX 1, 2, 3 or 4
ports must be set accordingly. The options are [in] and [out]. After selecting
[out] the signal is converted from the Art-Net network to the DMX output,
analogically after selecting the [in] option, the signal from the DMX input is
converted to Art-Net signal with the signal connection set (HTP / LTP)
[Merge mode]. For each port, the settings can be changed in the Art-Net
network configuration [ART-NET config.] in the [Port n] menu option in the
[Direction] option. Information about the status of ports is available from the
main menu.
8
ENTER
PX724 G4 DMX RDM
2.139.178.116
Directions
view ->
NEXT
ENTER
1:out 2:out
3:in 4:in