2
Safety conditions
Gate PX724 is powered directly from standard 230V AC grid what can
cause electric shock when safety rules are not observed.
Therefore it is necessary to observe the following:
1. Installation, particularly power connection, should be performed by a
person holding the appropriate qualifications, according to instruction
manual.
2. Gate can be connected only to grid, which has protecting installation
in working order (3-wire grid).
3. All the conductors should be protected against mechanical and
thermal damage.
4. In the event of damaging any conductor, it should be replaced with a
conductor of the same technical data and attestations.
5. Device with visible mechanical damage cannot be connected to the
mains.
6. All repairs, should be made with cut off power supply.
7. The device should be strictly protected against water and other
liquids.
8. All sudden shocks, particularly dropping, should be avoided.
9. The device cannot be used in places with temperature lower than 2°C
or higher than 40°C.
10. The device cannot be turned on in places with humidity exceeding
90%.
4
Summary of Contents for Gate 4 DMX
Page 1: ...PX724 Gate 4 DMX RDM User manual...
Page 23: ...23...
Page 25: ...10 Dimensions 25 155 205 42 5...