1
Description
Gate 4 DMX RDM is a gate that converts Art-Net signals to four output
DMX-RDM ports. From software version 1.01, the device also allows
conversion of DMX512 signal to Art-Net. The device is designed do run from
230V AC mains. This gate has a solid, metal housing protecting against
mechanical damage.
The device comes equipped with an Ethernet interface working in
10/100BaseTX protocol. The gate offers two modes of merging signals from
two sources: HTP and LTP. The protocol version used is Art-Net 4
(compatible 1 – 4).
The DMX512 ports are optically isolated XLR connectors, resistant to
mechanical damage.
In addition, on the device there are six LED indicator lights: two network
ones and four showing port's status.
The gate has a display and four buttons that allows to change the
configuration: Art-Net, Ethernet and DMX settings (such as: Brake, MAB, MBF
and the number of DMX channels transmitted).
The user can order additional components to be shipped with the device,
allowing for: installation of a single gate in a RACK cabinet, installation of two
gates in a RACK cabinet, suspending a gate (e.g. from a truss).
3
Summary of Contents for Gate 4 DMX
Page 1: ...PX724 Gate 4 DMX RDM User manual...
Page 23: ...23...
Page 25: ...10 Dimensions 25 155 205 42 5...