6
PX724 cooperation with the grandMA2
console
The PX724 gate can work with the grandMA2 console, however, support
for devices supporting the RDM protocol requires changing the console
settings.
To operate RDM devices, the settings must be changed in the gate
[Auto discovery] on enabled, the gate will continuously search for RDM
devices. The next step is to enable RDM support in the grandMA2 console.
To do this, go to Setup Console Global Settings
→
→
. Select [RDM] option
and switch to [On] mode, below is a screenshot of the console:
Next, the [Art-Net Output Active] option should be run in the console.
To start it, go to Setup Network Network Protocols
→
→
in the console menu
and attach it – orange backlight (screen on the next page).
18
Summary of Contents for Gate 4 DMX
Page 1: ...PX724 Gate 4 DMX RDM User manual...
Page 23: ...23...
Page 25: ...10 Dimensions 25 155 205 42 5...