background image

LOW NOx MAXIM 

 

  PACKAGED GAS WATER HEATER 

POLYSHIELD

®

 

 POLYMER-LINED STORAGE TANK

 

 PVI reserves the right to change 

the design and specification 

without notice. 

PV 6377  11/07 

PVI INDUSTRIES, LLC 

FORT WORTH, TEXAS 76111 

(800) 784-8326 

 (817) 335-9531 

  www.pvi.com 

STANDARD FEATURES AND EQUIPMENT 
 

• 

82% thermal efficiency 

• 

SCAQMD compliant 

 

NOx emissions certified at <55 ppm at 3% 0

2

 and/or less than 40 nanograms per joule (199 to 399 MBtu/h) 

 

NOx emissions certified at <30 ppm at 3% 0

2

 (above 399 MBtu/h)

 

• 

POLYSHIELD

®

 polymer-lined tank with 5-year warranty, three-year scale failure warranty and one-year cost-free  service policy    

 

Nonferrous, removable fittings at all tank connections 

• 

Copper-clad steel firetubes 

• 

SCALEGUARD

®

  tubesheet protection 

• 

Upper and lower immersion operating thermostats 

• 

Immersion temperature limiting device (high limit control) 

• 

ASME-rated temperature and pressure relief valve 

 Drain 

valve 

 

Handhole tank cleanout 

• 

Power combustion burner  

 Spark 

ignition 

• 

Electronic combustion sequencer and flame safeguard with pre-purge 

 

Combustion sequence indicating lights (> 399,000 Btu/h) 

 

Differential pressure air flow switch 

• 

Second main gas valve (> 399,000 Btu/h) 

 

Compliant with ASHRAE 90.1 for thermal efficiency and standby loss 

• 

Fiberglass insulated tank 

 

Draft regulator (barometric damper) 

• 

Steel jacket panels with industrial-grade finish 

• 

Factory-authorized start up 

 

ASME stamped—150 psi MAWP 

• 

National Board Registered for 150 psi working pressure 

• 

UL listed to safety standard UL 795 “Commercial-Industrial Gas Heating Equipment” 

• 

FM compliant

 

 

OPTIONAL FEATURES AND EQUIPMENT 

 

 

Long-life service policy    

 

AGA-rated temperature and pressure relief valve(s) 

 

2,500,000 Btu/h FM controls package. Adds electronic low-water cutoff, manual-reset high limit, single-try firing control and high-low 
gas pressure switch. (not required for FM compliance below 2,500,000 Btu/h) (available only on 540,000 and 650,000 Btu/h) 

 

CSD-1 / IRI compliant components include manual reset electronic low water cut off, manual reset temperature limiting device and 
Hi-Lo gas pressure switch (as required) 

 

Electronic combustion sequencer and flame safeguard with pre– and post-purge 

 

Electronic low-water cutoff 

 

Manual-reset, temperature limiting device 

 

DUO-SET

 controls for dual-temperature applications 

 

Dial temperature and pressure gauges 

 

Tridicator

 

 

Alarm bell with silencing switch 

 

Seven-day time clock 

 

Digital seven-day time clock with battery backup 

 

Air intake assembly for remote combustion air (requires field connection to ductwork supplied by others) 

Consult factory for other codes 

 

See complete warranty and/or service policy for details 

Reviews: