RD100 & RD200 PVA
Revision A (2016)
16 of 35
Manual
In manual mode, all the settings apply only to this mode. You can operate all
components of the system individually.
1.
Select
Manual
from Cyclestop.
Manual Purge
2.
Use the up and down arrows to scroll to the Manual Purge screen.
3.
Use the buttons on the left and right of the screen to select a valve to
Purge
or
toggle a
Z-Slide
.
NOTE: The Z-Slide will not activate when you use this option to purge.
Figure 12: Manual Purge
4.
Use the left and right arrows to select the
Tank
psi
. Select
Enter.
5.
Use the key pad to enter the new value.
6.
Select
Enter
to save the new value.
Manual, Timed Shot
7.
Use the up and down arrows to scroll to the Timed Shot screen.
8.
Use the buttons on the left and right of the screen to select a valve to
Purge
or
toggle a
Z-Slide
.
