BI2000 Board Inverter Manual
Revision F
/
February 2020
Page 20 of 37
Conveyor Width Adjust
This screen only applies to systems with automatic width adjust.
•
To manually adjust the conveyor width, go to the Conveyor Width screen.
•
Select the width value and use the keypad shown to enter a new width.
•
Select the
Target
symbol to move the conveyor to the set width.
•
Select the
Home
icon to home the conveyor.
Figure 16: Conveyor Width
Setup Mode
In setup mode, the operator can set the options for the PVA board inverter. The profile
name is shown at the top of the screen. You will make changes to the profile shown.
1.
Select the Setup icon or the “ESC” button from Cycle Stop.
2.
Use the Use the
+ - Page
icons or the
F2
and
F4
keys to scroll through the profiles.
The profile name is shown at the top of the screen. You can have a maximum of 30
profiles.
3.
Use the “
Left
”, and “
Right
” arrow buttons to scroll through the screens or the “F1”
and “ESC” hardware keys.
4.
Push the “
Home
” button or the
F3
key
to return to Cycle Stop. When you leave
Setup mode, all changes will be saved.
The profile that will run in Auto Cycle is the one shown on the screen.
